Product Detail

Features
Exclusive Digital Pitch Control:
A totally digital pitch control means your adjustments stay true from deck to deck. The SL-1210M5G also sports a greater range than earlier models. Switch easily between +/-8 and +/-16, and reset the pitch to 0 at the push of a button.

High Quality Sound:
Powerful bass and clear sound thanks to High Grade OFC (Oxygen Free Coil) tone arm cable and high-grade stereo PHONO cables.

Improved Tone Arm Construction:
The improved tone arm is designed to increase skip resistance. Easy to adjust height settings and a built-in anti-skate adjustment of up to 6g make the SL-1210M5G great for scratching.

Easy To Adjust Breaking Speed:
It’s simple to set the breaking speed to suit your liking with the SL-1210M5G. After removing the slip mat, all it takes is a few twists of a screwdriver to go from a slow winding down to an instant halt, or anywhere in between.

Exclusive Long Lasting Blue Stylus Light:
Super long lasting blue LED pitch indicators and stylus illuminator are exclusive to the SL-1210M5G.

More features:

High torque motor for quick start-ups
Quartz direct drive accuracy
Arm-end scale for quick weight setting
Highly sensitive low-mass tone arm with gimbaled suspension.
Stylus Kick Cancel and Anti-Skip
Technics Silver Head shell

Specifications:

Description	Measurement
Frequencey Response	20 Hz to 20 kHz +/- 1.5 dB
THD+N With 20 kHz Low Pass Filter	0.015% at 1 kHz
S/N Ratio: With 20 kHz Low pass filter and IHF-A Weighted	85 dB
Output Level	+6 dBV (1 Vrms) +/- 1dB at 1kHz, 0dB
Channel Balance	Within 1 dB at 1kHz, 0dB
De-Emphasis Response	+3/-0 dB at 16kHz, -20 dB
Channel Separation: With 20 kHz Low pass filter and IHF-A Weighted	90 dB at 1kHz, 0 dB
Searching time: (Test Disc: TCD-792) Short Access Time: Long Access Time:	2 sec Play next Track 4 sec Track 1 to 20, 20 to 1
Playability: Interruption: Black Dot: Finger Prints: Eccentricity: Vertical Deviation:	0.7mm TDC-725 0.6mm TDC-725 65um TDC-725 140um TDC-712 W/O Track Jump 0.5mm TDC-731R
Power Supply	AC 120V, 60Hz, 15W
Dimensions	318 (W) x92(H) x358(D) mm
Weight	4.4 Kgs.

M.202

Description	Measurement
INPUT / OUTPUT IMPEDANCE & SENSITIVITY Line Phono Mic Master Phones	-14dB/10K OHM ±2dB -50dB /47K OHM ±2dB -60dB /2.2K OHM ±2dB 1K OHM 0dB/33 OHM ±2dB (LOAD=32 OHM)
MAX. OUTPUT (THD=1%) Master	MORE THAN +14dBV (8.0V)
CHANNEL BALANCE	WITHIN 3dB
FREQUENCY RESPONSE: (line)	20-20KHz ±2dB
OUTPUT NOISE (IEC-A WEIGHTED) (line to MST)	LESS THAN -90dBV
THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF) (line)	LESS THAN 0.05% 20 - 20KHz
Signal to Noise Ratio	<106dB
Crosstalk	LESS THAN -80dB AT 1KHz BETWEEN CHANNELS. (TERMINATED UNUSED INPUTS)
Mic EQ hi Low	±10 +/- 2dB AT 10KHz ±10 +/- 2dB AT 100Hz
Channel EQ	Hi 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz Mid 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz Low 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz

Inputs/Outputs
Line Inputs	2 (RCA), -10dB/47K ohm
Phono Inputs	2 (RCA), -50dB/47K ohm
DJ Mic Input	1 (1/4"), -50dB/6K ohm
Master Output	1 (RCA), -10dB/47K ohm
Headphone Output	1 (1/4"), -3dB/33 ohms
Mic Tone	+/-10dB (Hi, Low)
Dimensions (LxWxD)	230 (W) X 267 (D) X 111 (H) mm
Weight	1.61Kgs (3.5 lbs.)